Is there any way of saving a representation of the results of a query created in the Message Viewer to a file - most obviously CSV.

We are reasonably adept at creating queries. We'd like to be able to send the output to a file, rather than resorting to cut'n'pasting from the message viewer window...

Is this possible? (on any version of Ensemble/Iris?)

Desired output to file something like:

ID,TimeCreated,Session,Status,Error,Source,Target,Body_MSH_MessageControlId,.....
1,8888888,2025-08-20 05:03:14.324,8438123,Completed,OK,ICE ADT Validator,ICE ADT TCP,1z123456,20220822......

For historic reasons we've got a mix of ADT feeds coming out of our PAS (TrakCare) to a wide range of downstream systems. In particular, there are some that are direct from TrakCare to the downstream systems, and many more that pass through Ensemble as our integration engine.

This is complicating management of the integrations, and so we'd like everything to go through the integration engine. In other words move from the flow in the top of the diagram to the flow in the bottom of the diagram:

When accessing management portal through IIS the page is not fully rendered and the buttons/links that are displayed don't work.

Management Portal works fine through private web-server.

Have just set up IIS/CSP Gateway to access Ensemble, and accessing the CSP Gateway configuration pages through IIS works fine (screenshot at end of post).

This is the view when accessing management portal through IIS (port 80) - missing images, links don't work, not all content displayed:

And this is the (top of the) view when accessing through the PWS (port 57772):

Is it possible to audit code changes in a namespace?

Ideally what we'd like to be able to do is check which classes were compiled (or deleted) in a time period, eg in last 3 months, and which user made those changes. Even better would be an audit of what those changes were, but that's less important (for us, as we can probably find that information in other ways).

I am attempting to follow the tutorial at Publishing Web Services Using Caché | Caché Web Services QuickStart Tutorial | Caché & Ensemble 2018.1.4 – 2018.1.11 to build a toy SOAP web-service using Cache but am running into what I suspect are permissions issues, or perhaps setting up the "plumbing" to get an incoming request to call the web-service methods.

Ensemble instance running on local laptop. Only the Ensemble private web-server installed on the machine (no IIS or Apache).

We have classes in a Production environment that are causing us some issues - example attached.

When we export them from the production environment the XML contains a snippet like the following:

<UDLText name="T">
<Content><![CDATA[
//Property any As list Of %XML.String(XMLNAME = "any", XMLPROJECTION = "ANY") [ SqlFieldName = _any ];

]]></Content>
</UDLText>

When imported and compiled into an Ensemble instance this class works as expected.

When viewed/edited in a development environment we run into issues - the presentation is similar with both Studio and VS Code.

InterSystems ObjectScript extension for VS Code, version 3.0.1

Am also asking this question on the extension's GitHub page: Request textDocument/documentSymbol failed. Error: name must not be falsy · intersystems-community/vscode-objectscript · Discussion #1530 - but suspect more eyes will see it here, which might help gather additional information.

Tried to compile some legacy ObjectScript code via Import/Compile in VS Code using the vscode-objectscript extension. Getting an error, and the content of the file is left changed on the filesystem simply by being compiled.

Is there a generic process for "walking" the structure of a virtual document - eg an HL7 message (EnsLib.HL7.Message) or an XML document (EnsLib.EDI.XML.Document).

At least we'd want to be able to visit all "nodes" (HL7 fields or sub-fields, XML nodes) in the virtual document and be able to work out/generate the Property Path (so we could call "GetValueAt"). 

We can just about come up with something generic for HL7, since it only nests down to 4 levels within each segment, though we're using numeric Property Path's at that point rather than symbolic ones (MSH:1.3 etc).

We are calling a REST web-service from Ensemble using EnsLib.HTTP.OutboundAdapter and redefining the adapter class to set custom headers as described by @Eduard Lebedyuk here: How to set Content-Type

During development we accidentally stumbled across puzzling behaviour - we now suspect that the %Net.HttpRequest object created in the linked example is being reused in the following scenario:

The compile step in VS Code when using the InterSystems VS Code extensions appears to modify line endings in our class files when newly pulled from remote repo.

What steps can we take to stop this happening? / What settings can we modify?

We are doing local development with client side source control using git (BitBucket Cloud repository). We were previously using GitLab (locally hosted) and didn't have this issue. Developers are all on Windows machines, as are all the Ensemble instances. We believe we have autocrlf = true in all our local git configurations.

Steps to reproduce:

We have some ObjectScript code in a custom business process:

When Log Trace Events is ticked on the business process in the Production view in the management portal, the argument is obviously computed.

Our question is whether the argument is computed when Log Trace Events is not ticked? Don't want to accidentally include something in a $$$TRACE() statement that takes enough computation to make a performance difference when released to production, even though the final output is not written to the event log.

We are using a DTL transformation to take HL7 and transform into custom XML (XML is a virtual document, held in an EnsLib.EDI.XML.Document object). The schema specifying the format of the XML says one element should occur no more than 24 times (maxOccurs="24" in the XSD schema). However, the transformation to produce one such element always produces 24 elements, all but the last one blank, when tested stand-alone. And when the sub-transform producing one element is incorporated into the full transformation to produce the whole XML object, it produces the wrong output.Is this a bug in the

We are using a DTL transformation to take HL7 and transform into custom XML. But the nodes in the resulting XML are appearing out of sequence - and therefore failing validation against the schema.

The XSD schema for the XML looks fine when imported into Ensemble: root node in the XSD looks like this:

And shows in Ensemble like this:

The transformation looks like this, and we can see the text from the trace elements at lines 5, 12 and 19 appear in the correct order in the event log:

HOWEVER, the resulting XML has the <allergies> nodes before the <patientNotes> nodes....:

Is it possible to generate INFO level logging events from within a routing rule?
TRACE level events and debugging are easy enough, but we have a case where we have a rule where we want to log messages that are not routed for further processing in the event log as INFO events - in production tracing will be turned off, so TRACE level events won't be visible.

We are building a data transformation from HL7 to custom XML. We've got an XML schema, and are using virtual documents (EnsLib.EDI.XML.Document).

We can:

An interface running on Ensemble generates PDFs by building a command line and invoking c:\InterSystems\Ensemble\fop\fop.bat

One day last week the PDF generation stopped working. The output from the .bat script says:

We are doing healthcare interface development.

Developers have Ensemble installed locally on their laptops - code will be developed locally then deployed to integration, test/UAT and ultimately production servers in due course.

One of the other applications we are developing around happens to utilise an Iris desktop client to a remote Iris server. We want to have the application available on the developers laptops alongside the local Ensemble instance.

✅ It appears that if we install their desktop client then install our local Ensemble server, things work.

I can START and STOP a business process via its Schedule setting.

Is it possible to change the value of another Setting in an analogous way?

I can imagine a SettingSchedule that could look like 

action:YYYY-MM-DDThh:mm:ss[,action:YYYY-MM-DDThh:mm:ss]

But rather than just START or STOP, action could be "SET Setting = value", overriding whatever the normal value is.

Is there an existing way of achieving this kind of functionality?

Question:can a business process with pool size > 1 invoke external programs in parallel via $ZF(-100)?

We have a production that takes HL7 (ORU_R01) messages in and produces a PDF from each one for onward transmission to a document store.

We have a custom business service that is triggered by a scheduled task. The service queries a table, iterates over the result set and sends a message on to a business process for each result. Happy path functionality is all fine.

However, when there is an error detected in the business service code, neither throwing an exception nor returning an error %Status behaves as we'd expect.

We are writing a custom Business Operation to interact with a downstream SOAP web-service. Classes for the SOAP operation were originally generated using the SOAP Wizard, then modified. This is functioning OK, but we'd now like to set the ReplyCodeActions setting on the operation and are struggling to make it visible via the management portal. How can we achieve this?

The classes are structured like this:

Does the GetValueAt method of an EnsLib.HL7.message object change the contents of the HL7 message?

We want to do two things, given an incoming HL7 message, in our production:

• transform the HL7 to XML, where the class TNHS.Utils.HL7toXML provides the same methods as, for example, EnsLib.HL7.Util.FormatSimpleXMLv2:

  set sc = message.OutputToLibraryStream(xmlstream,"","","TNHS.Utils.HL7toXML")

   

• extract a value from a particular field in the message: 
  

  Set ReportId = message.GetValueAt("PIDgrpgrp(1).ORCgrp(1).ORC:3.1")

How do we trigger a BPL Business Process on a time schedule?

We are building a production that takes a steady stream of (HL7) lab results messages, processes them and stores them in a temporary database table. At scheduled points during the day (eg 0800, 1300, 1600) the database is queried and messages sent on to the downstream system. Aiming that the Processes to be implemented in BPL if possible - but we are having trouble triggering code in a BPL as a scheduled job.

We are successfully using System Default Settings to manage differences in settings across environments where the production and underlying code are otherwise identical. However, the TestingEnabled and LogGeneralTraceEvents settings don't appear to be settable via this mechanism. While we appear to be able to set them on the SDS page, they do not show up as selectable when resetting the settings on the Production Settings tab in the management portal - see screenshots below. Is there any way of managing these two settings so we can have development and test servers running with TestingEnabled

Pointers please for debugging a SOAP web-client.

We have several clients in different productions all accessing a web-service. We are trying to add another client in a new production, and its not working. The messages between the relevant Process and the SOAP web-client Operation are the same in the working and the non-working productions. But the web-service is reporting an XML parsing error to the non-working production. Here's the error as reported in the SOAP web-client Operation...

Is there any way to see the output of the web-client Operation - what Ensemble is actually sending out?

We are trying to call a SOAP web-service from Ensemble, following the documentation here: Creating an Ensemble Web Client | Creating SOAP Services and Web Clients with Ensemble | Caché & Ensemble 2018.1.4 – 2018.1.8 (intersystems.com)

Is there a difference in outcome between the two screengrabs below?

In both cases, when  certain conditions are met, a transformation is called and the output sent on to two targets. In the first case we surmise the transformation is called twice, and the output of the first run sent to the first target, the output of the second run to the second target. In the second case we surmise the transformation is called once, and the output duplicated and sent to the two targets. 

We need to generate a PDF file from an HL7 message as it passes through an Ensemble production. Looking for examples, tutorials, documentation aligned to our scenario.
We are currently using Ensemble (so can't use InterSystems Reports at the moment). Thinking Zen reports...
We can get from HL7 to XML OK, following Introduction to InterSystems Health Connect - YouTube (see c.1:11:00-1:13:00)

We are about to embark on a development where we'll be taking HL7 messages and generating PDF reports from them. We are wanting to future proof our development efforts within the constraints of our currently deployed platform and future upgrade options. We are currently running on Ensemble 2018, though an upgrade to Iris is anticipated - at some indeterminate point in the future. We are aware of Zen Reports and InterSystems Reports (Logi) as technology options, but are also unclear on some details. A roadmap and guidance from those who've done this kind of thing before would be great!

One of our development Ensemble instances is misbehaving. We suspect we'll just need to reinstall it - which would be a hassle. Before we do, we wanted to check we weren't missing some kind of easy fix. The symptoms we are seeing: