I have a question where I have over 30 000 records of data that I would like to send in HL7 and was looking at sending these in one bulk messages instead of individual messages in HL7.In this kind of a situation has anyone ever sent a bulk HL7 messages or is there a way of doing this other than using FHIR bundle.

I am trying to log in to the Web Gateway Management and I have missed placed the password to access the system I have tried 

changing the password under local settings in the CSP.ini  and that has managed to change the password to access the gateway but cannot log me into the management area I have followed a post here and read here and I seem not to get the answers that actual explain how I can get to the web gateway management.

I need to connect to a SFTP server and I seem to connect and timeout have tested the connection using File-zilla and the connection was successful but the problem is when I try to connect using the FTP in bound adapter service I get the following errors.

ERROR <Ens>ErrOutConnectExpired: FTP Connect timeout period (120) expired for ***************.com:990/******/SSL='********* + ERROR <Ens>ErrFTPConnectFailed: FTP: Failed to connect to server ***************.com:990/******/SSL='********* (msg='Timeout waiting for response',code=529)

I have been trying to get to grips with the new dot Net Gateway used in IRIS as the import of the DLL to construct proxy classes is no longer supported in IRIS I have a third party DLL that when I try to instantiate throws an error complaining about the class not instantiated as it does not support parameterless constructor .I am using this new 

set gateway = $system.external.getDotNetGateway()
do gateway.addToPath(myPath_"\DotNetGatewaySamples.dll")

What is the recommended library for converting documents to pdf. Any suggestions welcome has anyone out there had a use case where they had to convert documents to pdf .What worked for them .I have asked WRC for the best practice and they have recommended that may be  a sale engineer might have an answer to this .

I have an operation using $ZF this operation ran and did not error but the job has been active and it can not be stopped I have tried stopping it from the front end and through the terminal using ##class(ENSLIB.Job).%New() Stop method. Now my production will not update even if I add a new item to the production I cannot update the item is there a way to force stop  this job.

I am trying to work with the FHIR Object Model where I convert an incoming  HL7v2 to SDA then FHIR. From here I would like to be able to process the FHIR Object by deserializing it to a Bundle object using the following code my problem is I keep on getting an error  which is not explaining much about what is wrong with what I am doing any help will be appreciated  thanks.

Property FHIRAdapter As HS.JSON.AdaptorFHIR;

Method OnRequest(pRequest As HS.Message.FHIR.Request, Output pResponse As HS.Message.FHIR.Response) As %Status
{

I am trying to call to a website that renders a xml structure as a response.if I put the url on the browser an xml rendered page is returned but if i call to this using the below code I get an object reference error which I am finding had to understand is there anyone who could help understand this error or point me in the right direction thanks.

Set tSC=$$$OK

I am using the %Net.HttpRequest class to download a file from the internet .using the following code. When a file is returned in the DOM I am able to read the file content and save it to the desired location but when my response is a download dialog nothing is returned in the HttpResponse. Am I doing something wrong here is where I have gotten to so far any help appreciated.

current code

I am trying to secure a rest service but I lack the understanding of how to achieve this if anyone will explain  in details how I could achieve the following:

Securing The REST Service with Basic Auth (username and password)

if any one has a sample code on this will appreciate 

I have a REST Service that I want it to receive a json string request I have set up my URLMap as follows the top URL when populated and requested works fine but I would like my request to be a json string and that is not working I am getting a 500 error am I missing something please advice.

XData UrlMap
{
<Routes>
<Route Url="/:emailAddress/:sendUserEmail/:password" Method="POST" Call="ResetPassword"/>        this works fine
<Route Url="/test" Method="POST" Call="test"/>              I would like this to receive a json formatted string for the above
</Routes>
}

I am calling a stored procedure over an ODBC connection and every time I call it there are several warnings written to the log event {Found no Parameter 1 (used as 1) for query}.I seem to be getting this on every query executed and that seems to happen a number of times the query parameters are per query and its filling up my disc.

1) Is there a way to suppress these warnings as the query seems to be executed and data written to the database?

I have  a SQL query that I want to run against MS SQL from cache ensemble using the SQL outbound adapter. If I run this query direct from MS SQL Studio it take about 7 seconds MAX and returns about half a million rows. The row only contains one column it is a number all same size and if I run this query in the production in ensemble it takes for ever the production finishes without getting the response back. The same query run in cache outside the ensemble environment writing results to a file it returns results taking about 3minutes to complete. But if I load the results into  a list or

In previous versions of cache I used to be able to write click on a class and get a delete class option but in this version I can not find the delete class option was wondering if there is another way to delete a class if you wanted to do some house keeping.

N.B. These are the classes I create not the ones that comes with cache.

I am trying to write a REST consumer the API that I am talking to expects a file to be sent over and in response I will get a file back if anyone out there has ever had a similar use case please could you kindly guide us or share some sample code please

Lets say I have a serial Class A ,Serial Class B,Serial C and Persistent Class Ens.Request

Class SerialA Extends (%SerialObject, %XML.Adaptor) [ ProcedureBlock ]
{
      Property SerialB as SerialB  
     Property SerialC as SerialC
}

     Class SerialB Extends (%SerialObject, %XML.Adaptor) [ ProcedureBlock ]
{
    Property SerialB as %String
}

Class SerialC Extends (%SerialObject, %XML.Adaptor) [ ProcedureBlock ]
{
     Property SerialC as %String
}

Class PersistantClass Extends Ens.Request
{
     Property Record as SerialA
}

the produced xml looks like this  :

I have a class that inherits from %Library.CachePopulateand when I try to compile that class in IRIS I get an error does anyone out there know if this has been decapreated or the equivalent class please, in 2018.2 I can see the class in the documentation but in IRIS there is no reference to it

I have been trying to pass a %Global  character stream back on a Soap Response has anyone one out there done it before please help with guide lines on how to achieve this thanks in advance just some working sample code and will take it from there thanks again

I am trying to return a stream soap response using web services I can call my web service supply it with a xml string which works fine . I then work on that XML and try to return  a Stream but all works in the production when my service receives the stream after I get the error  as if its trying to copy stream to a variable and I am confused as to where that operation happens.

The errors I am getting 
ERROR <Ens>ErrException: <METHOD DOES NOT EXIST>zCopyFrom+28^%Stream.TmpCharacter.1 *Rewind

and here is the stack trace in case I am missing something

I have a list property that I query from the database to get the values contained in that list using $LISTFROMSTRING() when the list is returned the list values contain a rectangle like character similar to when you copy past something to the Terminal and it has a preceding space .The problem is I need to compare those values to other values and they do not match because of this value I have tried to use $EXTRACT(value,*W) and *P but this is not striping the preceding character how do I get rid of this character any ideas please. 

the values returned from the Database 

is there a way to send commands to the CMD in windows form COS I would like to run an application within COS by sending a command to the CMD

In my production I receive an  XLFO stream and I would like to pass that to the FOP pdf rendering engine to produce pdf files .So far in my research that can be achieved through ZEN .I would like to create an operation that will take advantage of that and be able to pass my XLFO stream  to the operation and create pdf files I found something similar  here but for some reasons I get errors like below if any one understands what they mean please advice or someone  who had to do something similar advice on how to achieve this thanks in advance

Say I have a property in  a persistent class that stores list of colours and I would like to query that field and return  a list and be able to loop that list to get individual colours how will l go about achieving this I have tried something like this but its not working as expected

 &sql(SELECT colour INTO :colourList FROM favouritecolours)
 While (SQLCODE = 0) 
{
 for i=1:1:$LENGTH($P(colourList,","))
 {
 set fvalue=$P(colourList,",",i) 
write "the first"_fvalue,i, 
} 
}

the query returns colours but its just a string no delimiter eg;

green red blue

I have tried with

I have an above error when purging record map batches and was wondering if anyone  out there has ever experienced this and if they have please any advice

Failed to purge body for header 9747192, BodyClassname='******.Batch':ERROR #5823: Cannot delete object, referenced by '*****.Record.%ParentBatch'

I have a query that I would like to  have refreshing at certain intervals lets say every 30 seconds with out refreshing the page content using the META TAGS

refreshes the whole page but I have a jquery function that will run at those intervals that I can use the problem is getting the jquery to call my COS function or is the way to do it with pure COS

I am trying to base64 encode a string with non standard characters encoded in utf-8 also tried windows 1252  and I am getting error like so 

ERROR <Ens>ErrException: <ILLEGAL VALUE>zEncodeStream+18^ -- logged as '-' number - @' set encString = $TRANSLATE($SYSTEM.Encryption.Base64Encode(streamString),$C(10,13))' 

any help appreciated if anyone has faced this before

I have an xml that has non standard characters and I would like to transform it with xslt  so that those characters render in the format  &#nnn here is what I have so far any help appreciated 

xslt

I am trying to get the time difference between two time stamps one is recorded earlier to the one happening current but the problem is sql expect string while I have the other stored in a variable and if I do the following I get errors any help please

&sql(SELECT {fn TIMESTAMPDIFF(SQL_TSI_HOUR,$ZDT($H,3,1,3),tx)})

please note that tx is a variable holding the time formatted the same way as the one being compared to

I have an application using examples from the lottery example in samples name space how do I create a dynamically link based on the data displayed to add a record id to the link

the idea is to loop over the records displays fields and link to edit the shown data at the end of the record in a table format

what is the bullet point char value in COS the equivalent of •