Hello,
Please, we would need your help 🙂:
In a development environment, we have added quite a few presentation contexts to the DICOM configurations (the associations). We would need to find a way to export them from this environment to make it easier for us to import them in PRO (and avoid doing it by hand one by one).
Hello,
First of all: thanks for your help, and thank you for your time.
Thanks for your time.
We have the following situation:
We are in a BPL, and we have defined 4 <call> asynchronous as follows:
First one name: "Enviar a Proceso NEGRIN"
The second one, named as: "Enviar a Proceso HUNSC"
The third one, titled: "Enviar a Proceso CHUIMI 02"
And the fourth and last one names as: "Enviar a Proceso Fuertev"
Inmediately after the 4 calls, we have a <sync> instruction which should wait for all of them to finish.
Hello,
First of all thanks for your help, and thank you for your time.
We have the following task:
To generate by hand the Ens.Request with the properties and inner Data Schemes which represent this XML, in HealthShare, by hand; the XML is this one:
Hello,
First of all thanks for your time reading this question, and thank you for your help.
🎯 We would need to create an Ensemble HealthShare Operation to read files from a FTP / SFTP server.
We have coded:
Hello,
Thanks for reading this question.
We need to remove the line feeds and carriage returns from start and end, but not from the middle of a string
We have tested the following ways:
set output = $ZStrip("[line feed](carriage return) str [line feed](carriage return) ing [line feed](carriage return)","<>C")But it removes also control characters which we need to preserve...
Also we have tested:
set output = $REPLACE("[line feed](carriage return) str [line feed](carriage return) ing [line feed](carriage return)",$C(13,10),"")
Good morning, 🙂
I would like to ask a question, which has to do with how to manage %GlobalCharacterStream representing JSONS.
Thank you for reading this question, thank you for your help, and thank you for your time and attention.
Specifically, in a certain Process, we were querying 2 Operations, whose response we were converting to a Property called "informesAutorizadosRangoFechas" (reportsAuthorizedInRangeDates) which is %GlobalCharacterStream whose content is a JSON with the same structure.
That is, at a visual level, a concrete example is the following:
Hello,
I would like you to propose this challenge.
It has been created by the CodeWars community here: https://www.codewars.com/kata/6523a71df7666800170a1954/python
I will copy and paste the description:
A number is Esthetic if, in any base from base2 up to base10, the absolute difference between every pair of its adjacent digits is constantly equal to 1.
Hello,
I would like to propose you a challenge.
It has been created by a web user called "uttumuttu" and it is being explained here: https://www.codewars.com/kata/66314d6b7cb7030393dddf8a
Here is the proposed challenge copied and pasted:
This kata was created as a contender for the EPIC Challenge 2024.
It's your dream to have a magical wedding day, and you're willing to spend every last penny on it — while simultaneously planning for a stable retirement income.
Hello,
First of all thanks for your time and help with this question.
We wonder how could we convert a String which represents an XML, to a class which extends from Ens.Response
Our context is a REST Operation, where we currently split the String with $PIECE and set each propertie as follows:
Hello,
First of all thanks for your time, and thanks for your help.
We have the following doubt: how HTTP status is being replied from a SOAP Service to the Outbund System?
Where in HealtShare 2020's classes is being replied an HTTP/200 OK or an HTTP/500 or any SOAP HTTP status code?
We ask this because some outbound systems do need to have an HTTP 200 to being able to process our SOAP responses.
We have been examining the following classes:
EnsLib.SOAP.Service
%SOAP.WebService
%SOAP.WebBase
We have also read:
Hello,
First of all thanks for your help reading and answering this question, and thanks for your time.
We have been investigating how to handle the following need:
Our client which has the system which reveices our ESB's responses needs a SOAP response as follows, where all the ACK is inside a top XML tag called <ACK>:
Good morning,
First of all thanks for reading this question.
We have been asked by a client to check if our Soap Service has charset / encoding "UTF-8".
We have been investigating the class "EnsLib.SOAP.InboundAdapter".
We only observe one reference to the charset as "Set tCT=$S(tCST:"binary/CST; charset=UTF-8"
Inside the method: WriteResp
We have read:
https://docs.intersystems.com/irislatest/csp/docbook/DocBook.UI.Page.cl…
https://docs.intersystems.com/irislatest/csp/docbook/DocBook.UI.Page.cl…
First of all, thanks for your help, and time reading this question.
Why, when we send a SOAP message from SoapUI to a SOAP service in a HealthShare environment called 'ESBCHUIMI,' it recognizes the 'Credenciales' header, which has 'usuario' and 'password' as properties. This class is a %SOAP.Header.
However, when we load the WSDL using the SOAP wizard from this SOAP Service to another HealthShare environment called ESBSSCC and send it from SoapUI to ESBSSCC, when it is being forwarded from ESBSSCC to ESBCHUIMI, the ESBCHUIMI's service outputs:
Good morning,
First of all thanks for your help and time.
We find ourselves at a crossroads in our development journey, and we're reaching out to the community for insights and guidance regarding a critical aspect of our data management strategy.
Our current challenge revolves around the persistence of data in Globals, specifically when it comes to purging. The issue at hand is that, despite purging, data stored in Globals under the current %Persistent classes remains intact. To address this, we are contemplating a shift from %Persistent to %SerialObject for each relevant class.
Hello,
First of all thanks for your help, time, and answers.
We would like to know what are we doing wrong and how could we improve it and fix it.
We need to convert the Api Monitor Metrics which are a String with this format:
iris_cache_efficiency 13449.122
iris_cpu_pct{id="CSPDMN"} 0
iris_cpu_pct{id="ECPWorker"} 0
[...]
iris_wdwij_time 11
iris_wd_write_time 8
iris_wij_writes_per_sec 0
To JSON.
We would expect them to look like a normal JSON as follows:
{
"iris_cache_efficiency": "13449.122",
"iris_cpu_pct{id='CSPDMN'}": "0",
[...]
"iris_wij_writes_per_sec": 0
}
Hello,
First of all thanks for your time, thoughts, teaching and help:
We wonder how could we get the metrics from http://[Ip]:[Port]/api/monitor/metrics and use them in Kibana to chart statistics.
We would like to ask you how do you use the api monitor metrics, and as a second question, how would you suggest to utilize them in a third party software as Kibana to chart them.
We have thought to do the following:
Hello,
First of all thanks for your help.
We have the following scenario: some responses include special characters as ">" and "<" which are being put inside a property defined as:
Property PACPROBLEMAS As %String(MAXLEN = "", XMLNAME = "PAC_PROBLEMAS");
So then, when we observe the LOG SOAP it shows that the Target System replies to the ESB as follows:
➡️ <PAC_PROBLEMAS>46807#278.01#OBESIDAD INFANTIL GRAVE ( Z-SCORE IMC >2,70 ) #19/09/2019##N#</PAC_PROBLEMAS>
Hello,
First of all thanks for your time reading this doubt.
We have discovered the following behaviour. Inside a Router we have a roule which needs to filter out the ADT_A08 messages which have not OBXs.
The legacy system had this rule implemented:
(((Document.{OBX(1).SetIDOBX}<"1")||((Document.{EVN:EventReasonCode}!="COD")&&(Document.{EVN:EventReasonCode}!="FIN")))
However we have tested it and it does not filter out the ADT_A08 messages.
Is there any way to express inside a Rule, that we need to discard ADT_A08 messages which have not OBXs?
First of all, thanks for your time, and thank you; for reading, and answering this question.
We have been creating inside an HTTP Operation, a way to generate a JWT as follows:
Good morning,
First of all we would like to thank you for your time reading, thinking and aswering this question.
We have been developing a Transformation to convert a source ORU_R01 to a target ORU_R01. For each OBX segment we need to check an if, and then, if it is true we just need to put this OBX and continue to the next iteration, otherwise, if it is false, we need to put (copy) the ORC + OBR + TQ1 before this OBX, and then put this OBX, and after that, the SPM.
Hello,
First of all thanks for your help.
We have developed a REST Operation. We wonder how could we face that String do have a character limit.
We just need to convert httpRequest.HttpResponse , which is a stream , because $isobject(response.Data) returns 1; which has a JSON inside it, and we need to convert it to a Ens.Response.
This response is structured as same as the JSON's properties:
Class Mensajes.Response.Radiologia.CConcertados.BusquedaOrdenesNEGRINResponse Extends Ens.Response
{
Property data As list Of EsquemasDatos.CConcertadostoPACS.Radiologia.BusquedaOrdenes;
...Hello,
First of all, thanks for your help, and time, reading this questions, and answering to this doubt.
We have the following use case: to convert a HL7 ER7 ORU_R01 v2.5 message, to a Ens.Request Message which represent it with a custom data structure (each segment is a group of Properties).
To be more precise, the target Ens.Request Message's structure looks like:
Hello,
First of all; thanks for your time reading this post, and thanks for your answers and help. I am really grateful.
We have the following need: Send a DICOM Find Document to get the complete list of a patient's studies from an Outbound System, which we simulate with the tool called "dcm4che" specifically with these two commands:
1º.Initialize a DICOM database in simulator. We will use this database to run queries using DICOM C-FIND commands:
./dcmdir -c ./shared/DICOMDIR --fs-id SAMPLEDICOMS --fs-desc ./shared/dicom/descriptor ./shared/dicom
Hello,
First of all thanks for your time reading this post, and thanks for your help with your answers, thanks.
We have the following doubt: We need to create a REST Service in HealthShare, to process incoming calls with the following URL's format:
https://host:port/api/studies?patientId=11473564
To accomplish this task, we have previously read:
https://community.intersystems.com/post/advanced-url-mapping-rest
https://community.intersystems.com/post/how-do-i-process-querystring-pa…
https://community.intersystems.com/post/how-get-param-passed-get-rest-q…
Hello, good morning;
I would like to invite you all to try this game, it is a visual novel, it has not been made by me, and I have not any relation with the creator at all. It is free and playable with the web browser directly. It has English and Spanish as languages which you can play with.
https://lauralaureus.itch.io/asteria
However after trying it, some weeks ago, I was wondering if there would be any use case to connect a game engine (Unity, Unreal, GameMaker...) with IRIS HealthShare. 🌐🌐🌐
An image to show it looks like in the web browser:
Greetings.
Good morning,
Thank you for taking the time to read, understand, and answer this question.
If you needed to convert a message where questions are separated by "|", and the question text is the portion before the ":" and the response is the portion after the ":"; Which way would be the most readable and understandable for other developers?
Input example:
NAME OF SQUAD 1?:ALPHA|NAME OF SQUAD 2?:BRAVO|NAME OF SQUAD 2?:ANSWER THREE||NAME OF SQUAD 25?:YANKEE|NAME OF SQUAD 26?:ZULU
Output structure:
Good morning
Thank you for taking the time to read this issue.
In interoperability environments, in what way is it recommended to monitor and detect changes in Web Production components between environments, for example between Pre-Production and Production, or even between alternate Nodes of Production Mirrors?
We ask this question in order to find out what are the best practices, and what is the most methodical, systematic, simple, robust and secure way to perform this monitoring.
When you find yourself in need or desire of learning something new in technology and you face the challenge of embarking on a new venture, what is the appropriate starting point? How do you decide where to begin and how to gradually approach the process, especially when the challenge seems overwhelming?
Myself I read official documentation or try to start with something I know and then learn something new very related.
Hello,
First of all thanks for reading this question, and thanks for your time, trying to help us.
We would need to find a value inside the first element of a list, which is a property inside a Request Message.
The Message is:
Good morning,
first of all thank you for taking the time to read and answer this question.
Recently, since we have upgraded to HealtShare 2020, we experienced the fact that when opening in the Studio the Process (.bpl) and Transformation (.dtl) classes, it asks us to log in, i.e. username and password, almost every time we open a new Process or Transformation.
However, in previous versions, I think we had HealthShare 2016 or 2017 or 2018, and in it, you could log in from the Studio in Processes and Transformations, logging in 1 time only.